How to install an RV GPS tracker?

In this blog post, we will answer the question: “How to install an RV GPS tracker?” We will discuss the steps to install an RV GPS tracker and talk about a few important tips to consider. We will also describe some of the best GPS trackers that are used for RVs, along with their features and specifications.

How to install an RV GPS tracker?

To install an RV GPS tracker, you need to follow the steps described below.

• Find the right location

• Take the voltage reading

• Check the sockets

• Attach the wires to the GPS console

• Wire the tracker

• Double-check the wiring.

Find the right location

• To install an RV GPS tracker, you will need to find the right location. Several locations are recommended when it comes to installing GPS trackers for RVs. Some of the recommended locations are front das, front bumper, cab roof, trailer roof, and rear bumper.

• The easiest and most recommended location is to install the RV GPS tracker in the front dash. It is easy to install the RV GPS tracker in the front dash than in the other locations. The other locations may not be as accurate. However, you can still install an RB GPS tracker to a preferred location if the other locations are not feasible.

Take the voltage reading

• Next, you will be required to open the console gear to check the fuel meter wire. Once you locate the fuel meter wire, you will be required to take it out for monitoring purposes.

• While checking the voltage reading, be sure to keep the engine running. You must take the voltage reading in three different steps. First, when the fuel tank is full. Second, when the fuel tank is half, and third when the fuel tank is empty. Make sure to take the reading before proceeding.

• You will need to take the meter wire and extract it from the console to attach the device for measurement purposes.

• Remember to keep the earth wire along with the meter wire since it is required during this stage.  

Check the sockets

• The next step is to check the sockets, you must open the GPS console to check the sockets before the installation process. Apart from the GPS antenna, the other vehicle trackers possess fuel and power auxiliaries.

• Place the tracker behind the glove box. Find a suitable place and make sure that it is placed properly. The main intention is to keep your vehicle safe during emergencies. Be sure to install the tracker in a safe position.

 

Attach the wires to the GPS console

• Next, you will need to attach the wires to the GPS console. Once all the wires are aligned to the GPS tracker, you will be required to place it in the glove box.

• The fuel meter, earth wire, and car battery wire should be attached to the socket inside the GPS console. This is used for measurement purposes.

Wire the tracker

• The next step is the most important as you are required to wire the tracker to the battery to attain power. To do this, you can go ahead and fix the wire through the bonnet.

Double-check the wiring  

• Be sure to double-check if all the wires are connected properly. Ensure that the wires are connected tightly. While attaching the wires work patiently and make sure that they are connected. The information should be perfect and there should be any chance of a short circuit.

Tips to install an RV GPS tracker

• Apart from the steps and procedure, there are a few tips to consider when installing an RV GPS tracker.

• Refer to the manufacturer’s user manual and double-check the instructions. Most RV GPS trackers come along with a user’s instruction manual. Do not follow your own steps and be sure to contact an expert if you are not comfortable installing an RV GPS tracker.

• Be sure to verify the inventory and check all the parts of the kit if there are any damages. Make sure that the device is not faulty.

• It is also important to use a 3 to 5-amp in-line fuse to protect the device. This is essential in case of any power surge and it will also prevent any major accidents. In case you have a live device, it is essential to install the device immediately.

• Do not use wire nuts without any torque seal. You will be required to use a poke-and-wrap connection method. Use a multimeter to find the wires that need to be connected.

• Never pinch the wires since it can trigger a huge current leak. Make sure to install the device near the steering column.

• The most important tip to consider is that the GPS device should receive a constant power of 12 volts. This is applicable even when the ignition is off. The RV GPS tracker device consumers more power when the RV engine is powered. Make sure to have a minimum voltage of nine volts.

• Never cover or block the GPS antenna with metal since it might cut the signal. It is also important not to tap the wires since it can impact the safety of the vehicle, especially the airbag wire. Do not hesitate to call a professional to install the RV GPS tracker.

Best GPS trackers for RVs

Getting the right GPS tracker for your RV is important. Be sure to get a GPS tracker that is built to last long. Durability and accuracy are one of the most important aspects to consider when purchasing an RV GPS tracker.

Track 4 GPS tracker

• Track 4 GPS trackers are built for RVs and all types of motorhomes. These trackers have a high customer rating and are simple to use. It has a compact since and the installation process is easy.

• The Track 4 GPS tracker also provides email and text options. It has special features like online sharing and is equipped with the right tools for trucks, vehicles, and trailers.

Global view GPS tracker

• This is a solar magnetic GPS tracker that can be installed on trucks, RVs, and trailers. It has a mobile and a web application included along with a fleet GPS locator. The solar charging system is one of the best benefits.

Family First GPS tracker

• This particular model is waterproof and weatherproof. It also arrives with a five-year battery life. There are constant updates on movement and also provides updates while moving out of a geo-fence. One of the major advantages is cell triangulation when there is no GPS. This GPS tracker is built for all climatic conditions.

Optimus GP 100M GPS tracker

• The Optimus GP 100M tracker can also be installed on a car’s battery. One of the special features of this model is the speed monitoring facility. It has a hardwired installation process that can be easily connected to the car’s battery. 

• Another major benefit is the 30-second update on corners. There are also email and text message alerts for movement and speeding.

Those were some of the best RV GPS trackers that are widely used for RVs and motorhomes. A GPS tracker is important for RVs since they come in handy during the most crucial situations. Be sure to follow the installation manual and get in touch with a professional to make the installation process easy.

Conclusion

In this blog post, we have answered the question: “How to install an RV GPS tracker?” We have discussed the steps to install an RV GPS tracker and talked about a few important tips to consider. We have also described some of the best GPS trackers that are used for RVs along with their features and specifications.

Citations

https://www.liveviewgps.com/how+to+install+a+hardwired+gps+tracker.html

How To Properly Install A GPS Tracking Device

https://anrvlife.com/how-to-install-a-gps-tracker/

How Are RV Owners Using GPS Tracking

Best RV GPS Trackers

Trailers & RVs

https://www.rvtravel.com/fight-rv-crime-install-gps-tracker-rv-1050/