How to install a Bidet in an RV?

In this blog post, we will answer the question: “How to install a Bidet in an RV?” We will discuss the simplest steps to install a Bidet in an RV from scratch. We will also talk about the materials and tools that are required for this project. At the end of this post, you will learn to install a Bidet in an RV in less than an hour.

How to install a Bidet in an RV?

To install a Bidet in an RV, you must follow the steps described below.

• Select the Bidet

• Gather the materials

• Turn off the water supply

• Remove the toilet seat

• Prepare the toilet

• Install the Bidet

• Connect the water supply

• Adjust the water pressure

• Test the Bidet

• Reinstall the toilet seat

Select the Bidet

• Installing a Bidet in an RV is an easy process and it can take just a couple of hours to complete this project. This is a DIY project that can be accomplished with ease. However, you will need the right materials and tools.

• First, you must select the right Bidet that is compatible with the RV toilet bowl. The Bidet must also be compatible with the water supply system. There are specific Bidets that are manufactured and produced for RVs. 

• It is essential to get an RV-specific Bidet to ensure that it is the perfect match for the RV and the water system.

• Ensure to check for RV-specific Bidets or ask an expert to help you in this situation.

Gather the materials

Next, you must gather the materials that are required for this process. Apart from the Bidet, you will need some equipment and tools. Here are some of the materials and tools listed below.

• Pliers or adjustable wrench

• Teflon tape

• Screwdriver

• Water supply line

• Mounting hardware

• Safety gloves and goggles

Turn off the water supply

• Once you have gathered the materials and tools, you can go ahead and start the installation process. Ensure to turn off the water supply of the RV to install the Bidet. It is also advised to inform another person at home while working on this project.

• Shut the RV’s water supply that is connected to the RV’s toilet. You can do this by easily shutting off the valve that is located behind or under the toilet bowl. It is not necessary to turn off the entire water system.

Remove the toilet seat

• Next, you must remove the toilet seat. You cannot install a Bidet with a toilet seat in place. Remove the hardware behind to take off the toilet seat. Unscrew the nuts on the hinge bolts and lift the seat off the bowl. Keep the hinge bolts or nuts in a safe place so that you do not lose them.  

Prepare the toilet

• The next step is to prepare the toilet by cleaning up the area. The toilet bowl has to be clean and free from any debris if any.

Install the Bidet

• Next, you can go ahead and start the installation process. Most Bidets arrive with an attachment. You will be required to install the attachment by placing it on the toilet bowl. Ensure that the Bidet is aligned properly with the bowl’s contour.

• In case you are installing a Bidet seat, you will be required to align the mounting brackets with the holes in the toilet bowl. Secure the mounting brackets in place with the provided screws and nuts that come along with the Bidet.

Connect the water supply

• After installing the Bidet, you can go ahead and connect the water supply. Remember to check the type of Bidet you have purchased. If the Bidet arrives with a water supply line, you must connect the inlet of the Bidet to the valve of the toilet’s water supply.

• Use enough Teflon tape on the threads to make sure that the connection is leak-free and tight.

Adjust the water pressure

• The next step is to adjust the water pressure. Some Bidets arrive with water pressure settings. You can adjust the water pressure according to your preference.

Test the Bidet

• After adjusting the water pressure, you can go ahead and test the Bidet. Turn on the water supply behind the toilet bowl and test the Bidet. Check if the Bidet is functioning properly. It is essential to check for leaks. Tighten the connections in case of any leaks.

Reinstall the toilet seat

• Finally, it’s time to reinstall the toilet seat. Reinstall the toilet seat over the Bidet attachment and secure it with hinge bolts.

Those were the easiest steps to install a Bidet in an RV. Installing a Bidet in an RV is a simple project. However, it is important to turn off the water supply and use the right materials and tools. It is also essential to get the right Bidet that will suit the RV. Get in touch with a professional if you are unable to do this task on your own.

Conclusion

In this blog post, we have answered the question: “How to install a Bidet in an RV?” We have discussed the simplest steps to install a Bidet in an RV from scratch. We have also talked about the materials and tools that are required for this project.