How to convert a Toyota Pixis Epoch into a camper?
By
Elaine Knight
In this blog post, we will answer the question: “How to convert a Toyota Pixis Epoch into a camper?” We will discuss the steps to convert a Toyota Pixis Epoch into a camper successfully. We will also touch upon the essential equipment that is required for a camper.
How to convert a Toyota Pixis Epoch into a camper?
To convert a Toyota Pixus Epoch into a camper, you need to follow the steps described below.
- Remove the rear seats
- Clean the area
- Measure the area
- Add a wooden floor
- Build a bed
- Install a portable table
- Attach portable shelves or cabinets
- Fix a portable sink
- Install a freshwater tank
- Install a greywater tank
- Add curtains
Remove the rear seats
- The Toyota Pixis Epoch is a small car that arrives with limited space. Converting a Toyota Pixis into a camper is an easy task, but only a few things can be done with limited space.
- First, you need to remove the rear seats to ensure you have space to convert the car into a camper. Keep the driver and the front passenger seat and remove the rear seats.
Clean the area
- Next, you need to clean the rear area. Remove the carpet on the floor and clean the roof and walls. Use soap and water to clean the floor as well. Get rid of any damage if you find any. You might find grime or dust at the corners. Ensure to remove everything with the help of a cloth.
Measure the area
- Next, you must measure the area of the Toyota Pixus Epoch. Use tape and measure the length, width, and height. Note down the measurements since it is going to be useful later on.
Add a wooden floor
- Since you will be adding objects to the camper, you will need to add a wooden floor. This will make installing the bed and all the other objects easier. The wooden floor will also act as insulation for the camper.
- Cut 2 by 4s according to the measurements that you have taken before. Cut the 2 by 4s according to the camper’s width and length. Cut enough 2 by 4s and lay them vertically on the floor. Next, you can lay the horizontal beams over the vertical ones. Use adhesive to install the beams to the floor of the camper.
- Cut plywood panels according to the measurements of the floor and fix them onto the 2 by 4s by using adhesive. Ensure that the plywood panels are cut according to the measurements of the floor.
Build a bed
- A camper without a bed is no camper. The bed is the most important aspect, and the best way to build a bed is by using wood. Use the same 2 by-4s and plywood to build the bed.
- First, you need to take the measurements of the bed. Try to keep it as small as possible since the space is limited. Build a frame in the shape of a rectangular box with the 2 by 4s and the required measurements. Add crossbeams on the frame to install the plywood.
- Add plywood on top and the sides of the frame. You can add hinges to the top plywood sheet and use the bottom area for storage space. Try to use piano hinges for this purpose. Make sure to cover the frame properly on each side.
Install a portable table
- The rear area of the Toyota Pixis is small, and the best option is to install a portable table. There are plenty of camping tables that can be used. Camping tables can be folded and stored away with ease. You can use these camping tables for having your meals.
Attach portable shelves or cabinets
- There are plenty of portable cabinet options that are available for campers. These can be bought online, and they are easy to store. These cabinets can be attached to the walls and can also be easily stored away when not in use.
Fix a portable sink
- It’s always good to fix a portable sink in the camper. These sinks are tiny and are built for all types of campers. A portable sink can be installed in the corner of the Toyota Pixis Epoch. You can connect the portable sink to the freshwater tank and the outlet to the greywater tank.
Install a freshwater tank
- Install a 25-liter freshwater tank under the sink or the camper’s bed. You can also simply place it on the ground. A freshwater tank is essential if you plan to camp for a few days. Connect the freshwater tank to the sink.
Install a greywater tank
- You will also require a greywater tank to connect the wastewater from the sink. Plenty of greywater tank options are portable and easy to install. Be sure to purchase a greywater tank that is the right fit for the camper.
Add curtains
- Add curtains to the windows of the camper to blot out the sun. You can also use blackout curtains for purpose. Attach curtains that will match the interior of the camper.
Another option to consider is installing an exterior portable shower system. You can install solar panels on the camper’s roof for those who want to camp off-grid. A couple of 100-watt solar panels should be enough to get your Toyota Pixis Epoch up and running. Try to keep it as simple as possible to save on space.
Those were the steps to successfully convert a Toyota Pixis into a camper. Remember to keep your preferences first and make sure that there is enough space to walk around the camper as well. The most important part is to install a bed and a portable camping sink. Feel free to add a few items to the necessary camper.
Conclusion
In this blog post, we have answered the question: “How to convert a Toyota Pixis Epoch into a camper?” We have discussed the steps to convert a Toyota Pixis Epoch into a camper successfully. We have also touched upon the essential equipment that is required for a camper.
Citations
