How to build an RV table mount?

In this blog post, we will answer the question: “How to build an RV table mount?” We will discuss the steps to build an RV table mount and talk about the required materials for this project. Additionally, we will touch upon the best RV table mounts that are available at a reasonable price and easy installation.

How to build an RV table mount?

To build an RV table mount, you will need to follow the steps described below.

• Decide the dimensions

• Decide on the type of mount

• Install the mount base

• Cut the pipes

• Install the table mount

Decide the dimensions

• Before building an RV table mount, you must decide on the dimensions of the mount. RV tables vary in different size, but most table mounts are built to suit the size of the RV benches.

• The dimensions can vary and you can choose to have your dimensions. The most important part is knowing the height of the mount. You will need to determine the height of the RV mount and there are no other required dimensions as such. The height is the only part to consider when deciding the dimensions.

Decide on the type of mount

• Next, you will need to decide on the type of mount that you want to build. The most common RV table mount is straight. However, some mounts can be moved around.

• Some mounts are flexible and it helps when it comes to moving the table around. Once you decide on the dimensions and the type of mount, you can go ahead and purchase the material.

Install the table mount base

• Decide on the area where you plan on building the RV mount and install the mount base accordingly. The mount base will be installed on the floor of the RV. Various types of RV mount bases are available, you will need to choose the base according to the type of RV table mount that you plan on building.

• You will need to install the table mount base to the RV floor with the help of screws. This is one of the easiest options to consider. Make sure that the table mount base has a diameter of half-inch. 

• The table mount base will stand still on the RV floor, while the table mount can be rotated into the diameter just like rotating a screw into the nut.

Cut the pipes

• To keep it simple and moveable at the same time, you can install pipes as the RV table mount. These pipes can be fixed to the mount base.

• Steel galvanized pipes are one of the best options to consider for this project. Use half-inch steel pipes to keep it small but sturdy at the same time.

• Cut a piece of pipe to 30 inches and make sure that both ends have threads since they need to be fixed together with the help of these threads.

• Next, you will need to cut a pipe to 10 inches. This is going to be the horizontal pipe that will be fixed to the vertical pipe. Ensure that both ends of the pipe have threads on each side just like the previous one.

• You will also need to have two pipe elbows to connect the horizontal and vertical pipes. For the vertical pipe, you must have a pipe elbow that has both female ends. On the other end, you will be required to have a pipe elbow that has a female end and a male end.

• Just like the table mount base, you will need to have a similar one that can be fixed to the top of the table mount. This will help to fix the tabletop with ease.

Install the table mount

• Next, you can go ahead and install the table mount to the table mount base that you fixed on the RV floor.

• First, you will need to place the vertical 30-inch pipe and rotate it into the table mount base that you installed on the RV floor. Make sure that it is rotated correctly and double-check to see if it is sturdy.

• Next, add the pipe elbow that has both female ends to the top of the vertical pipe. Do not tighten it to the maximum since the elbow needs to be a little loose. The elbow should be able to rotate freely but it should not be loose at the same time.

• Add the 10-inch horizontal pipe to the other end of the elbow. Make sure that the horizontal pipe is screwed properly and stable. The Horizontal pipes should not be loose.

• Next, you will need to add the other elbow to the other end of the horizontal pipe. Rotate the female end to the horizontal pipe and leave the male end facing upward. The second elbow mount needs to be rotated and fixed tight.

• Finish the process by installing the top part to the male end of the pipe elbow. This is where you use the tabletop mount which is similar to the one that you installed on the RV floor.

• Rotate the tabletop mount onto the male end of the pipe elbow and you should be good to go. You can fix a tabletop according to your requirements later on. This RV table mount is rotatable and you will be able to move your table around in a circular manner. The 10-inch pipe radius is sure to help you come all the way.

To build an RV table mount, you will be using limited materials and the process is pretty simple. It will hardly take up to three hours to complete this project and this can be done by one person. You can also opt to install a portable RV table mount if you are not keen on having a rotatable one.

Best RV table mounts

If you are unable to build an RV table mount, you can still opt to purchase one. There are plenty of pedestal and adjustable RV table mounts that are available in the market. Here are some of the best RV table mounts describe below.

Rulline adjustable table mount

• Rulline is a pedestal and detachable table mount that can be installed with ease. This is an adjustable table mount that is compatible and can be used anywhere. The installation is easy and it arrives with all the necessary equipment.

• You can easily adjust the height of your RV table with the help of the adjustable table mount. It also has a decent price range and is made up of high-quality aluminum to last longer.

Daluobo detachable table mount

• Daluobo is one of the best table mounts that are easily adjustable and detachable. One of the major advantages of this table mount is that it has a 360-degree rotation. They are built with aluminum alloy material for durability and can be fixed to the RV wall or RV sitting table.

• The installation process is simple and it is a multipurpose detachable table mount that can be installed anywhere.

Sequoia III table mount

• The Sequoia III table mount is manufactured by ITC and it is one of those table mounts that are versatile. These table mounts can be used for all types of motorhomes, and boats, and can also be used at home. It is made up of steel and it arrives in three different sizes.  The installation is easy as it arrives with the table mount base and required tools.

Conclusion

In this blog post, we have answered the question: “How to build an RV table mount?” We have discussed the steps to build an RV table mount and talked about the required materials for this project. Additionally, we have touched upon the best RV table mounts that are available at a reasonable price and easy installation.

Citations

https://www.lyfuninterrupted.com/post/how-to-make-an-affordable-rv-pedestal-table-easy-diy

https://www.youtube.com/watch?v=qDeu0p4KS6k

How to Build a Camper Van Swivel Table

https://www.wikihow.com/Make-an-RV-Table-Sturdier

https://www.truckcampermagazine.com/camper-mods/projects/8-lagun-table-system-projects/